While going through my notes, I have found this list of seals and bearings so I thought I’ll share it with you all, maybe some of you will find it useful. It is not a complete list of all bearings, but most are in this list.
# Yamaha XT660Z Suspension Bearings and Seals
- Front wheel bearings 2x 17x40x12 6203-2rs seals 2x 23x40x8
- Swingarm pivot bearings 2x (but can be fitted 4x without bushings, like i did – read more here) 22x28x20 (SKF KK2220) seals 4x 22x28x8
- Swingarm to dogbones 2x 17x24x15 seals 2x 17x24x3
- Linkage to dogbones 2x 17x24x15 seals 2x 17x24x3
- Linkage to shock 1x 17x24x15 seals 2x 17x24x3
- Linkage to frame 2x 17x24x15 seals 2x 17x24x3
- Rear wheel 2x 17x40x12 7203-2rs seal 1x 23x40x6
- Sprocket carrier/hub (not modified) 1x 5303-2rs seal 1x 30x52x7
# Yamaha XT660Z Engine Bearings and Seals
- Crankshaft counterweight 2x 62x25x17 seal 1x 25x40x3
- Crankshaft bearings 2x KOYO 6308 (YA3)
- Output shaft Right NSK 804 6004DLA8 (+seal between shaft and closed casing)
- Output shaft Left 1x 6305 seal 1x 35x59x2
- Gear lever shaft seal 1x 12x22x5
- Gearbox 2nd shaft Left 804 6004 DLA8
- Gearbox 2nd shaft Right 6205
Explore More!
- Story of my lovely Bombproof Yamaha XT660Z tenere!
- Yamaha XT660Z Bearing and Seal Sizes – cheat sheet!
- How to make motorcycles Cable Clutch lighter! (Part 1/3)
- Cheap ways to make your motorcycles clutch lighter! (Part 2/3)
All Yamaha XT660Z faults and hiccups that left me scratching my head.
- How to fix rattling headlight reflector
- How the regulator rectifier overcharged my Tenere’s battery.
- Funny oil leak, or how i lost 1 liter of oil in 500 miles.
- Funny story: how my XT660Z fuel reserve light tricked me, leaving me stranded!
- How the starter relay got fried twice on my xt660z!
- How I fixed a squeaky / rattly dash on my xt660z!
All Yamaha XT660Z Mods!
- Hole in the air filter box (for rear shock removal).
- Heed crash bars.
- Barkbusters.
- Protaper adventure Evo Handlebars.
- Rally style clamps and handlebar risers.
- Ultimate addons case and Touratech gps bracket.
- Folding mirrors.
- Clamp type of bracket for dash.
- Wind Buffeting modification.
- Toolbox.
- Storage box for First Aid Kit.
- Folding screen extension – Modified.
- Paintwork.
- Seat Hump Removed – Flat Seat Mod
- Dynojet Power Commander V and power mods.
- Foam Air filter.
- Ohlins 6nm springs.
- Hyperpro progressive spring.
- Swingarm bearing modification.
- Wiring loom – switch controls.
- Fiberglass under seat storage.
- Shortened rear brake pedal with anchor and welded folding tip.
- Extended Clutch actuator arm.
- Shortened brake and clutch levers.
- Pivot pegs.
- Fuel tank air bleed modification.
- Shortened Side Stand.
- Lowered Rear end.
- Suspension Grease Niples.
- Lucas Regulator Rectifier.