Clutch lever too heavy on your XT660Z? No problem – here are 2 cheap solutions to solve that! Lets go straight to the point!
Method 1. This one will be easy for xt owners, as all that’s needed is one part that is used on Yamaha MT07, lucky it fits xt660z like the old one, it’s just longer by 1 cm than original! One centimeter that makes all the difference! And all what’s needed is this Part: YAMAHA MT07 PUSH LEVER ASSY P/N 1WS-16340-00 (and circlip pliers as it might be a bit tricky to take the original actuator arm without them)!
Method 2. Cheaper, quicker and can be used on a number of bikes too! And yes, probably guessed it now- to extend the original clutch actuator arm by 1cm! And it’s as easy as chopping it, welding it, grinding it, sanding it, priming it, painting it and putting it back where it came from!
If one of these steps can not be done, I highly suggest taking it to a specialist (a friend with all the tools) or ditch the idea altogether and go read another post about “5 ways how to make motorcycles cable clutch lighter!”, or “Other ways to make motorcycles clutch lighter!”.
Anyway, that’s by far the simplest way to achieve a lighter clutch feeling if cuttings and welding tools are present.
Have to mention that by extending the clutch actuator arm on the engine casing to get a lighter clutch lever on the handlebars, clutch lever sensitivity will be sacrificed. Means that to change gears, the rider will have to pull in the clutch a bit more than before, but at the same time that gives a bit more control when it comes to feathering the clutch! Whether it’s a good thing or not, I’ll let you to decide!
Explore More!
- Story of my lovely Bombproof Yamaha XT660Z tenere!
- Yamaha XT660Z Bearing and Seal Sizes – cheat sheet!
- How to make motorcycles Cable Clutch lighter! (Part 1/3)
- Cheap ways to make your motorcycles clutch lighter! (Part 2/3)
All Yamaha XT660Z faults and hiccups that left me scratching my head.
- How to fix rattling headlight reflector
- How the regulator rectifier overcharged my Tenere’s battery.
- Funny oil leak, or how i lost 1 liter of oil in 500 miles.
- Funny story: how my XT660Z fuel reserve light tricked me, leaving me stranded!
- How the starter relay got fried twice on my xt660z!
- How I fixed a squeaky / rattly dash on my xt660z!
All Yamaha XT660Z Mods!
- Hole in the air filter box (for rear shock removal).
- Heed crash bars.
- Barkbusters.
- Protaper adventure Evo Handlebars.
- Rally style clamps and handlebar risers.
- Ultimate addons case and Touratech gps bracket.
- Folding mirrors.
- Clamp type of bracket for dash.
- Wind Buffeting modification.
- Toolbox.
- Storage box for First Aid Kit.
- Folding screen extension – Modified.
- Paintwork.
- Seat Hump Removed – Flat Seat Mod
- Dynojet Power Commander V and power mods.
- Foam Air filter.
- Ohlins 6nm springs.
- Hyperpro progressive spring.
- Swingarm bearing modification.
- Wiring loom – switch controls.
- Fiberglass under seat storage.
- Shortened rear brake pedal with anchor and welded folding tip.
- Extended Clutch actuator arm.
- Shortened brake and clutch levers.
- Pivot pegs.
- Fuel tank air bleed modification.
- Shortened Side Stand.
- Lowered Rear end.
- Suspension Grease Niples.
- Lucas Regulator Rectifier.
Explore More!
A list of posts about Bike Maintenance and General Modifications that might be Interesting to know!
General Modifications:
- Throttle Tamer Mods (4 ways to tame your horse!)
- Projector headlight conversion from right side road traffic to left and vice versa.
- How to make your own Exhaust or how to modify an existing one.
- Power Commander (PCV) and Thoughts on it.
- Brake Snake / Pedal Anchor – why and how!
- Lighter Clutch Mods:
- How to make motorcycles Cable Clutch lighter! (Part 1/3)
- Cheap ways to make your motorcycles clutch lighter! (Part 2/3)
- How to make a Hydraulic clutch lighter on your motorcycle! (Part 3/3)
- How to make Custom Clutch or Throttle Cables – Easier than you thought!
- How to make clutch lever lighter (Yamaha XT660Z Tenere Specific)
- Rear Suspension and Drive-Train:
- How to extend the life of Cush-Drive rubbers.
- The dangers of motorcycle lowering links, Important things to know!
- How to swap rear shock spring with no special tools!
- The Best Motorcycle chain lube!
- How to set motorcycle chain slack when suspension is not standard?
- How To Remove Stubborn And Hard To Reach Chain Adjuster Bolt
- The List of Most Useless Adventure Motorcycle Mods And Bling!
- Dangers of the lowering kits (things to know before Lowering your Bike!
Bike Maintenance:
- How to pass MOT the first time – every time!
- How to Maintain your motorcycle Locks (works with all locks!)
- Best Suspension Bearing Grease!
- What grease to use on your motorcycle?
- How to shorten Life of your wheel bearings! (Or what not to do to them!)
- Why should you grease your bolts! (And not only Bearings!)
- What is the best Chain Lube for your motorcycle?
- How to buy used Motorcycle – Free Guide.
